[Video] Dust Explosion at Farm in South Indiana, August 2017

On the 1st of August 2017 a grain bin collapsed at a farm in South Indiana, USA causing a large dust explosion, luckily no one was hurt, but this accident does highlight the risks of dust explosions and how quickly they can happen.

So how did this happen? Well, the corn itself didn’t explode, but the huge cloud of grain dust generated by the collapsing bin did. This is what’s known as a dust explosion and is a serious hazard on farms as well as industries like Pharmaceutical Production, Recycling Centres, Power Generation, Wood Processing plants and many more similar industries.

If a solid substance is finely ground it may ignite more readily or at a lower energy. If any combustible substance is mixed or suspended in air at the correct concentrations and contained in a vessel or building when ignition occurs, then a violent explosion can result. If it is uncontained then a fireball may occur. Source: Health and Safety Executive

In this instance as the grain bin collapsed 3 power boxes were ripped off. The grain bin trapped a concentrated amount of oxygen which, when combined with the spark from the power boxes and the dust particles, caused a rapid combustion and a resulting fire ball which can be seen in the video below.

Because this explosion took place in the open air the severity of the explosion was reduced, but if it had happened within an enclosed building, the effects could have been catastrophic; resulting in severe damage to the building and significant amounts of flying debris. Just take a look at the picture below of the Imperial Sugar Refinery following a dust explosion in 2010.

If your facility is one where potentially explosive atmospheres, materials or processes exist, the UK Health and Safety Executive (HSE) provides guidance on the prevention of dust explosions. Although their article is particularly targeted at the food industry, their recommendations can be applied to most industries at risk of dust explosion.

In section 3 “Precautions against dust explosions” among other things the HSE recommends that you should

…fit silos or bins with explosion relief and vent to an unoccupied place of safety, preferably outside the building. Ensure that the venting system is designed to an acceptable standard. Vent openings should be unrestricted to allow the free venting of an explosion. Protective systems such as explosion relief panels need to be ATEX certified.” (3.6)

Explosion Venting Solutions

Common explosion venting solutions include shear bolts, fractionable fasteners or collapsible washers, however they do have their issues. Since they are installed in the field, they are highly dependent on proper installation on site.

Plus, they cannot be non-destructively tested or verified, the only way to know if they are installed properly and will work, is if there is an explosion event. Not ideal.

But there is a solution, developed by Construction Specialties (CS) with over 35 years of research and development in the field of specialty venting:

CS Explovent